beko/leisure range kdvc100x

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › beko/leisure range kdvc100x

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 14, 2021 at 12:22 pm #100033
    mikehha
    Participant

    Before I go to this range can anyone tell me how to change the drop down oven door hinges(rt hand door).

    September 14, 2021 at 6:44 pm #478980
    electrofix
    Moderator

    have sent you the manual

    Dave

    September 15, 2021 at 6:53 pm #478981
    mikehha
    Participant

    thanks for that dave at least it will give me a start after I have figured out the English. But they still don`t say how to get to the screw that holds the inner hinge in? It also seem a bit of a pain if you have to take off the top and burners just to take off the side. O and of course the back panel !
    thanks again mike.

    September 16, 2021 at 5:43 am #478982
    kaibart
    Moderator

    Good luck doing that I had to do a report on 1 as the screw nearest the cavity front is impossible to get out I’ve tried just a screw driver bit that’s how tight it is to get at the screws,I would try bending the back of the hinges downwards if this doesn’t fix it it will be cabinet fault

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.