hoover DXCE41OW3/1-80 error

Home › Forums › Trade Technical & Spare Parts Forums › hoover DXCE41OW3/1-80 error

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • September 16, 2021 at 10:11 am #100038
    dunston
    Participant

    Hi. on a hoover DXCE410W3/1-80, s/n 3100651516273207 i am getting a E01 error which i think is a time out error. If i put it onto wash, drain or spin a second after i press the start button the error flashes up. i have checked the element, solenoid valves for continuity and the are ok, the pump is ok and i have even tried fitting a new door interlock. Has anyone had this fault before? or point me in the right direction?
    thanks . Mark.

    September 16, 2021 at 10:39 am #479001
    electrofix
    Moderator

    I get E01 as

    Door Safety Lock Device/Drum’s Braking device defective and/or Wiring. or

    Defective Door Safety Lock Device and/or Triac on Power Module and/or Wiring.

    Dave

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.