Indesit ids105 wont stop filling

Whilst i wait for trade access to be granted, need some help.

JUst come back to the repair side of the game (through circumstances rather than choice) after spending last 5 years on the retail arm of the business.

Nothing much has changed but i had an indesit slimline today that was leaking.

Turns out its leaking out the front right corner of the door, and isnt ducting into the base to trigger the antiflood.
ive taken the oversized askoll pump off and cant see anything mechanically wrong with it. Ive checked the pressure switch hose is clear.

​​​​​​NO error lights. If you start the program, it does the usual drain then fills and that is it.

Im guessing its probably the askoll or the pcb,
I didn’t have my repair kit with me at the time as i was only sizing up a new hob and oven, so had this sprung on me, im planning on going back at the weekend but wondered what kind of values i should be getting from the multi meter?

​​​​​​Does anyone know input v for the askoll from the terminal (I’m guessing 230v energised and 0.2-0.4v at rest?) And the resistance value it should have?

or can anyone provide any other suggestions?
​​​​​​​
Ta

Rich

​​​​​