Lamona DW

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Lamona DW

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • November 9, 2021 at 12:30 pm #100225
    pmb
    Participant

    Hi I am having trouble with a Lamona LAM8603 dishwasher. It’s filling and draining at the same time, after the initial just draining at the start.
    The original fault was that it was tripping the electrics.
    The base had filled with water so I dried it all out, I have tried replacing the PCB but it’s still the same.
    What would cause this?
    Thanks, Darren

    November 9, 2021 at 1:30 pm #479770
    electrofix
    Moderator

    have you checked the overflow microswitch ? may be shorted inside

    Dave

    November 9, 2021 at 2:31 pm #479771
    pmb
    Participant

    Is that the anti flood switch?
    if not where is that?
    Thanks, Darren

    November 9, 2021 at 8:56 pm #479772
    electrofix
    Moderator

    yes anti flood has direct feed to pump

    Dave

    November 10, 2021 at 12:50 pm #479773
    pmb
    Participant

    Thanks I’ll go back and check that

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.