Dryer not heating

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Dryer not heating

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • December 1, 2021 at 3:00 pm #100304
    fasetester
    Participant

    Dryer not heating and keeps running thanks fasetester

    December 1, 2021 at 5:23 pm #480067
    fasetester
    Participant

    Beko DRVS 62w might have someting to do with sensor dry thanks fasetester

    December 1, 2021 at 9:00 pm #480068
    electrofix
    Moderator

    check both NTC

    should be 19500 ohm at 25 degrees

    Dave

    December 1, 2021 at 11:10 pm #480069
    fasetester
    Participant

    Thanks dave is one ntc at the front and one on heater if the moisture sensor was dirty inside the drum would this cause this fault fasetester

    December 2, 2021 at 10:06 am #480070
    electrofix
    Moderator

    dont think moisture sensor would cause as programme would end and you say it keeps going

    rear sensor on heater is first on list

    i normally carry an old hotpoint heater ntc and link in with covers off as a quick test

    could also be heater relays

    Dave

    December 2, 2021 at 11:35 am #480071
    fasetester
    Participant

    Ok dave ntc cant be shorted out to test as far as i know sensor dry program no heat keep running thanks

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.