frigidaire built under freezer replacement door seals

Home Forums Public Support Forums General Enquiries And Questions frigidaire built under freezer replacement door seals

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #100379
    charles XYZ
    Participant

    Hi. I would like a new door seal for my built under freezer model FVE 3803A. Frigidaire say that they do no replacement parts. Is there a generic seal that would do please ?!

    #480380
    kwatt
    Keymaster

    The original is obsolete.

    You could try a universal door seal but they are or, can be a right pain to fit but essentially it’s just a case of time and patience to do that. The two most common ones are:

    https://shop.ukwhitegoods.co.uk/3286218-universal-fridge-freezer-door-seal

    https://shop.ukwhitegoods.co.uk/3286219-universal-fridge-freezer-door-seal-17712

    But there are stock issues with the cheaper of those, there has been for some months now with everyone waiting on them.

    K.

    #480381
    charles XYZ
    Participant

    Thanks for the info.

    It never was a particularly good seal. It’s as if the corners are a bit too hard. I must have defrosted it 20 times when the door is open a crack when I didn’t shut it hard enough.

    Hey ho ! I’ll persevere for a while.

    #480382
    electrofix
    Moderator

    sometimes warming the door seal with a hair dryer will soften the plastic enough so it closes better

    dont heat it too hot though

    Dave

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.