Cannon 10450GF- replacement grill element

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Cannon 10450GF- replacement grill element

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 7, 2022 at 5:51 pm #100536
    BobG
    Participant

    I have just replaced the grill event in our Cannon range cooker. I had thought I had obtained an exact replacement but when fitted and tested it wouldn’t work. Looking at it again I see that I have inadvertently sourced a grill element that instead of being made up of two separate 1300w elements I have one that is 1800w/800w. Putting my thinking cap on, I swapped the connections to suit the two different elements as they were not configured like the old one and it is now working on both settings except that it isn’t half and half. Is there any reason why I shouldn’t leave this as fitted and operate as before?- accepting that I have a slightly bigger grill on minimum setting.

    February 7, 2022 at 10:37 pm #480992
    electrofix
    Moderator

    cant think of a reason and the chances are you will not need to use both elements as the centre element should be big enough

    Dave

    February 8, 2022 at 8:46 am #480993
    BobG
    Participant

    That’s what I was thinking but thought worth asking. Many thanks.
    Bob

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.