- This topic has 7 replies, 2 voices, and was last updated 3 years, 10 months ago by
.
-
Posts
-
The oven when connected to power will light up the UI panel for about 1 second (with a clicking sound when turning on), and then it goes off for about 1 second (with the same clicking sound). It does this indefinitely in a loop.
Prior to this behavior the oven already occasionally will have flickering on the clock display on the UI panel. Pressing a button tends to fix it and resets the clock back to 12:00.
I have also removed the oven from the cabinetry and plugged it into different sockets, with same results. A visual inspection after taking the top cover off and cover above the power cord connection into the unit did not reveal obvious damage or abnormalities.
Am I correct in diagnosing the unit has a faulty UI control panel and board? This is the spare part on AEG https://shop.aeg.co.uk/c/user-interface-board-set/p/140194181255
Model : BEK351010M
look about right
you can
1 look for bulging capacitors on the board
2 replace it
3 or bridge the clock so it wont affect the oven
Dave
electrofix wrote:look about right
you can
1 look for bulging capacitors on the board
2 replace it
3 or bridge the clock so it wont affect the oven
Dave
The spare part for a new user interface board has arrived and was indeed this that was stopping the oven from turning on properly. Now however, the oven light doesn’t turn on, and I suspect I may have reconnected a wire on the selector board wrong. Is there anywhere to find the wiring manual?
electrofix wrote:will need a complete PNC number and Model no to look it up
Dave
Hello,
It’s BEK351010M, PNR 94418790900. Unhelpfully aeg.co.uk chat support simply disconnected me when I asked for it
Not immensely but maybe to the right person!
Thankfully the wiring was okay – I thought I connected the wiring wrong to cause the oven light not to turn on, turns out the halogen light’s filament broke. Definitely a good idea to take a photo before unplugging wires!
Thanks for your help Dave!
- You must be logged in to reply to this topic.