Home › Forums › Public Support Forums › Help And Support › Other Appliances › Luxair LA-110-FLT – Motor pulsing and lights flickering
- This topic has 12 replies, 3 voices, and was last updated 3 years, 10 months ago by
Rake.
-
AuthorPosts
-
May 28, 2022 at 9:38 am #100855
Rake
ParticipantHi All,
we have the above hood and on any fan setting the motor – fan pulses low high low high, if I turn the lights on the fan stops and lights flicker. Without the fan on the lights pulse or flicker too.
any ideas on what this might be and how to fix it ?
I have a feeling it’s the PCB but not 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}
thanks in advance
May 28, 2022 at 11:29 am #482405electrofix
Moderatorit is the pcb
if you can remove it and posr pic i may have more ideas
Dave
you may have to host pics offsite
May 28, 2022 at 8:49 pm #482406Rake
Participantelectrofix wrote:it is the pcb
if you can remove it and posr pic i may have more ideas
Dave
you may have to host pics offsite
Thanks Dave, I don’t even know where it’s located on this model but I’ll try to find it and post pics if I do.
May 28, 2022 at 8:59 pm #482407electrofix
Moderatornormally somewhere in the chimney
Dave
May 31, 2022 at 11:02 am #482408Rake
ParticipantOk removed chimney and all I can see there is a transformer.
will the pcb be on the control panel which houses the light and fan switches ?
May 31, 2022 at 11:12 am #482409Rake
Participant[IMG2=JSON]{“data-align”:”none”,”data-size”:”full”,”src”:”https://postimg.cc/yDz1f95g”}[/IMG2]Not sure if this will work –
May 31, 2022 at 11:26 am #482410electrofix
Moderatoryes can see it
open it and see if there is electronics in there. does look a bit small for a main panel but you dont know till you look
Dave
May 31, 2022 at 11:32 am #482411Rake
ParticipantMay 31, 2022 at 12:07 pm #482412Rake
ParticipantJust checked with Luxair – £74 for a replacement ! Bligh me
May 31, 2022 at 12:49 pm #482413electrofix
Moderatorok got the measure of that
there is a large X2 cap poss 1uF ( you need to check. first pic at the bottom)
get one and change it and there a good chance it will be fine
Dave
May 31, 2022 at 3:12 pm #482414Rake
ParticipantThanks Dave, is that the one in position C4 – 1000 micro farad ?
May 31, 2022 at 3:41 pm #482415tubafan
ParticipantThe X2 capacitor Dave is referring to is the large grey rectangular one at the bottom of your picture.
May 31, 2022 at 5:35 pm #482416electrofix
Moderatortubafan wrote:The X2 capacitor Dave is referring to is the large grey rectangular one at the bottom of your picture.
correct
Dave
-
AuthorPosts
- You must be logged in to reply to this topic.
