- This topic has 5 replies, 2 voices, and was last updated 3 years, 10 months ago by
.
-
Posts
-
Hi,
I have just changed the brushes on a Bosch classixx 6. Put it on a rinse spin , all seemed to be working ok but now i have the 1400, 1200 & 600 lights flashing. Any advise pleaseHi.
replaced the brushes and ran an empty rinse/spin cycle. Drum turned, water filled, but wouldn’t empty. I switched it off at the dial turned the dial back on and got the error. I’ve tried resetting the error but it won’t go away.double check your brushes are making contact with the armature
make sure your doing the correct reset procedure for the machine
Dave
Double checked the brushes. Still the same error and unable to reset.
before I changed the brushes, the 1400, 800 & rinse were flashing.
this time it’s the 1400, 1200, 600.https://www.ukwhitegoods.co.uk/help/fault-codes/laundry-fault-codes
look here to see if your fault code is listed
Dave
- You must be logged in to reply to this topic.