- This topic has 7 replies, 2 voices, and was last updated 3 years, 8 months ago by
.
-
Posts
-
My BEKO DIN15x11 has stopped filling/washing.
On start up it pumps out any remaining water (I have poured water in to check) but then nothing happens. I say nothing but when I open the door after pumping out it is empty but a short time later there is water appearing in the bottom again.
I thought I could hear water trickling in and and have changed the incoming solenoid but no difference.
Any advice gratefully received, apologies if I have missed a similar answer.
It seems to be filling ok, I somehow thought it used to be louder. The programme runs ok, including heating the water, then switches off as it should. Just no water to the spray arms.
Possibly the pump?
if main motor is energising but not running, provided its free to turn it could be thr motor capacitor
which is most likely a 4uFhttps://shop.ukwhitegoods.co.uk/3068006-washing-machine-tumble-dryer-dishwasher-capacitor-4uf
Dave
Argh motor free to turn, new capacitor, still nothing.
I take it I check across the two wires feeding it for a supply when it should be running?
you need to make sure its energising
could be a broken wire from controller or controller itself
Dave
- You must be logged in to reply to this topic.