Hotpoint aquarius

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › Hotpoint aquarius

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • August 16, 2022 at 3:38 pm #101095
    ratty2828
    Participant

    Hello

    I have a hotpoint aquarius tumble drier i need to replace the heating element when i took of the back i noticed that the fan that is attached to the motor was spinning freely,,, is this normal or should it be fixed to the motor so it turns when the motor does thanks in advance

    August 16, 2022 at 7:39 pm #483326
    electrofix
    Moderator

    normally yes fan is fixed to motor

    Dave

    August 16, 2022 at 8:32 pm #483327
    ratty2828
    Participant

    Thanks Dave
    Any idea how i can fix this problem

    August 16, 2022 at 8:45 pm #483328
    electrofix
    Moderator

    will need a lot more info to see which one you have

    need
    model number, Commercial code and serial no

    all on label inside door

    Dave

    August 17, 2022 at 1:58 pm #483329
    ratty2828
    Participant

    Dave
    The m/n is CDT00P the s/n is 703200075 the IND CODE IS 95313490000 The fan is situated just below the heating element and i am just wondering if it should be fixed to the motor spindle or does it spin freely

    August 17, 2022 at 7:13 pm #483330
    electrofix
    Moderator

    yes fans should be fixed to both ends of the motor shaft

    if its the rear plastic fan have had a few of them go

    https://shop.ukwhitegoods.co.uk/c00208040-hotpoint-others-tumble-dryer-recirculating-fan

    Dave

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.