BEKO washing machine – Stops on rinse

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › BEKO washing machine – Stops on rinse

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 13, 2022 at 4:36 pm #101253
    asp11
    Participant

    This does actually stop on rinse during any cycle, it works fine on rinse only but stops when in a wash program……
    It just goes silent and the display stays the same for about a minute then the pause & lock lights flash and it shows a tap symbol – it empties fine, so I’m thinking its a pcb error rather than any other part failure as it works fine on a seperate rinse cycle…… Any ideas please?

    Model = WMB81243LB
    Ser = 17-100855-03
    Prod = 7115641800

    October 13, 2022 at 5:15 pm #484038
    electrofix
    Moderator

    have you checked the valves ?

    Dave

    October 14, 2022 at 1:22 pm #484039
    asp11
    Participant

    Yes the double valve works fine as it goes through a rinse cycle ok and when it stops during any other setting there’s no sound at all, no buzzing no clicking, nothing which makes me think its the pcb not sending any signal out at that point?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.