Bosch sgv57t03gb trips breaker

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Bosch sgv57t03gb trips breaker

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • October 22, 2022 at 11:43 am #101275
    alexh
    Participant

    Hi, another fault with this old Bosch dishwasher. You’ve previously helped me replace the suppressor. This morning the machine tripped the main circuit breaker when i tried to start it. Now it either trips immediately when turned on or occasionally will power up then trip if a program is started.

    ​​​​​​Any ideas on potential causes?

    October 22, 2022 at 8:49 pm #484141
    electrofix
    Moderator

    chnge socket and try again

    then if no check base for water or leaks

    Dave

    October 23, 2022 at 2:34 pm #484142
    alexh
    Participant

    There’s a little bit of water in the base. Salty build up near the motor. Looks like it might have been leaking a little bit? Can i disconnect the heater and pump to check if they’re causing the trip?

    October 23, 2022 at 4:49 pm #484143
    alexh
    Participant

    When the white and purple wires are disconnected from the motor the machine no longer trips the breaker. So, i guess a new motor is required? Is there any chance that if i dry out the motor, clean off the salt and stop further leaks that it will work?

    October 23, 2022 at 10:28 pm #484144
    electrofix
    Moderator

    motor is still available but at £167

    maybe a used one off ebay otherwise its time to change

    Dave

    October 24, 2022 at 8:57 pm #484145
    alexh
    Participant

    Ouch, yes that’ll probably write it off. Thanks Dave.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.