- This topic has 2 replies, 2 voices, and was last updated 3 years, 4 months ago by
.
-
Posts
-
Just changed a cracked hob on a EU631FEB1E/03.. All working fine before hand, a few screws on the side hob lifts off and new gently put in place with nothing disturbed. Worked fine for a few days but customer called me back as one element was not as responsive with the touch control, lift hob again to check to check all okay, all foam on PCB in place etc.
When put back to try nothing works? just flashes EEEE hold down any element and 0 5 3 1 comes up. could the lack of thermal paste on sensor be a problem?
see if this helps
E0531: Internal error in the User Interface sensors.
(1) Possible Cause: Cylindrical foam sensor touching another sensor or the board due to incorrect glass assembly.
(1) Possible Fix: Check that the sensors are in the correct position and not forced by the glass. Mount the glass correctly.
(2) Possible Cause: Faulty sensors.
(2) Possible Fix: Replace the User Interface.
Dave
- You must be logged in to reply to this topic.