hotpoint WMAO743PUK

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint WMAO743PUK

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 23, 2022 at 9:36 am #101388
    tash
    Participant

    Hi has anyone had this fault before. washer fills with couple of inches of water when off. fitted new valve checked for back flow still doing the same. found that if the machine is switched off at the socket it doesn’t fill but if any power to machine it does. . no voltage on valves when i checked?

    November 23, 2022 at 10:12 am #484564
    electrofix
    Moderator

    got to be a voltage on the valve somewhere otherwise it would still fill when turned off at wall

    Dave

    November 23, 2022 at 10:34 am #484565
    tash
    Participant

    yea must be just wondered if it was common . cheers Dave

    November 23, 2022 at 4:54 pm #484566
    matrixresonator
    Participant

    Not something I’ve come across, however last week I installed a brand new Candy and the valve was stuck open, machine starting to fill as soon as the hose was connected even with no power!

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.