Tap icon simens sn66l080gb

Home Forums Public Support Forums Help And Support Dishwasher Help Forum Tap icon simens sn66l080gb

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #101408
    Colin106
    Participant

    siemens sn66l080gb. there was an error e25 I cleaned the pump and the dishwasher worked until I put the dishwasher back in place since then the tap icon is displayed and the dishwasher cannot be turned on so I pulled it back to check if no hose is bent everything looks fine do I need to replace the aquastop house

    #484628
    andyjawa
    Participant

    I doubt it`ll be that aquastop hose to be honest that has failed. Your best bet is to 1) make sure the actual tap is switched on then 2) start the machine to cancel the previous programme then turn off the machine then turn back on and start a fresh new programme and see if the thing will now fill. Just in case we are not singing from same hymm sheet if the machine does fill and the wash motor is washing but not heating up the heater has snuffed it; not saying it will be but if no heating very common heaters fail on these machines so just look out for that and hopefully you are not another victim the error code for a duff heater is e09 but it can depend upon how and when the machine all went so terribly wrong. The error code e25 is as you figured a pump out related problem ( very common ) just make sure you have the pump chamber cover clipped back in otherwise it will not pump out or pump out properly which can confuse the machine and confuse the hell out of you too..

    #484629
    andyjawa
    Participant

    PS e15 is a water leak on the under base tripping a float switch that is common too = no fill drain pump on forever with door shut or door open

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.