- This topic has 6 replies, 2 voices, and was last updated 3 years, 3 months ago by
.
-
Posts
-
I’ve had a little search on the forum which has directed me to:
—E7 Pressure switch error
Mesh plate
Check filter or microfilter
Check pressure switch
Check circulation pumpSometimes the dishwasher works fine, other times it just beeps once and flashes. The drain pump stays on until I turn the machine off. Any thoughts?
Thanks!
get error v5 for pressure sw fault not E7
if it is a pressure sw fault
its going to be either
the switch
a blockage
or the boardbut first of find connections to switch and board and remove and replace twice to rule out bad connections
Dave
Nice one, thank you. If i’ve got the side off, then I guess I might as well take out the pressure switch and give it a big of a clean? I will check for blockages too of course.
Okay, of course the machine has worked perfectly today. It beeps for about a minute straight as it fills up, then it works fine. It will probably work for a few days now, then it will stop working again.
Chucked a new float switch in, still having the same issues. Lights are on for the standby button, and 2 others. I have a video now too: https://youtube.com/shorts/vagJCNFEbeo?feature=share
Any thoughts? Thanks!
- You must be logged in to reply to this topic.