- This topic has 1 reply, 2 voices, and was last updated 3 years, 2 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Had to gain access to the sump as it was blocked.
After clearing the blockage and reassembling, the control display now flashes when the machine is switched off. When you press the on/off button to turn it on, everything is fine. But when you press it off, the display briefly pulses/flashes around every 5 seconds.
Any ideas, please. I’ve never worked on one of these before. Didn’t realise how expensive the were either.
cheers.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.