WD!2 won’t stop filling.

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › WD!2 won’t stop filling.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 17, 2005 at 3:24 pm #10175
    admin
    Keymaster

    My indiset wd12 will not stop fillinf with water thru the powder drawer. I have changed the solenoid on the water inlet to no avail. Any ideas???

    June 17, 2005 at 3:29 pm #138740
    iadom
    Moderator

    Re: WD!2 won’t stop filling.

    A strong possibilty is a faulty pressure switch or associated parts, can also be caused by burnt control module, rather expensive. Not something you should change on the off chance it is that, you would be well advised to get an engineer out.

    June 17, 2005 at 3:33 pm #138741
    admin
    Keymaster

    Re: WD!2 won’t stop filling.

    Cheers for that tho’ not really what I wanted to hear!!!

    June 17, 2005 at 3:46 pm #138742
    Martin
    Participant

    Re: WD!2 won’t stop filling.

    I have to suggest that the fault may simply be a split in the water level sensing hose from the sump to the water level switch 💡

    Usually the little black hosepipe rubs against the cabinet and gets punctured!

    Cure = New hose ❗

    June 20, 2005 at 7:39 am #138743
    admin
    Keymaster

    Re: WD!2 won’t stop filling.

    Turns out the circuit borad was fried!! A common problem when water drips on it- you’d think they’d keep it well covered wouldn’t you!!
    thanx for the ideas

    June 20, 2005 at 8:44 am #138744
    iadom
    Moderator

    Re: WD!2 won’t stop filling.

    The reason I mentioned the PCB in my earlier post was due to the fact that I had two machines with this fault in the last week.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.