lam8602 dishwasher

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #101918
    suedehead1
    Participant

    the lamona/beko dishwasher is leaking from the front in the middle of the door on further inspection it is leaking through the door interlock.
    anyone know how this is possible, anyone seen it before, what will i do to fix it?

    #486709
    electrofix
    Moderator

    not something i have seen

    do you mean its leaking at the top of the door ?

    Dave

    #486710
    suedehead1
    Participant

    yes at the top of the door door shuts fine no leaks at corners, its an integrated one i took facia door off and water
    is quite clearly coming through the door interlock.
    spray arms turning operates fine but leaks badly.

    #486711
    electrofix
    Moderator

    really weird

    have you checked the bars for split sides ?

    Dave

    #486712
    suedehead1
    Participant

    the seals look fine door closes fine, door springs are fine. it works fine but water definitely coming through door lock

    #486713
    electrofix
    Moderator

    its not getting on the roof and coming through that way is it ?

    Dave

    #486714
    matrixresonator
    Participant

    I’ve had one leaking through the door lock too, unfortunately never got to the bottom of it as it had other issues and was scrapped.

    #486715
    suedehead1
    Participant

    Definitely through the door lock no idea how to fix it.

    #486716
    dunston
    Participant

    We have had a couple of integrated Beko dishwashers with steam coming out of the top of the door.Reinstalling them correctly stopped that fault.
    Lamona and Beko dishwashers door switches will operate even if the door is not completely closed. check all the screws in the door and check the hinges are not bent.
    We have repaired dozens of these dishwashers – it is a strange fault.

    #486717
    suedehead1
    Participant

    took it out of its space, checked all screws hinges changed the door seal still the same. Had to scrap it.

Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.