- This topic has 5 replies, 3 voices, and was last updated 2 years, 9 months ago by
.
-
Posts
-
Hello everyone , I’m no fan of these but hey ho , starts fine after 3 min the time cuts to 001 , stops , it will restart no problem but stops every time , I’ve taken it apart cleaned everything, checked components
but all to no avail, anyone have info thanksassume you have cleaned the electrode and are trying it with wet clothes in there
if yes you can check wires from electrode to the board , check board for faulty caps
if all ok my guess is a board fault but which one is another questionmakes it BER if a board has gone
Dave
Ok test programme for this is make sure door is closed turn the dial clockwise 8 positions press and hold button nearest to dial and turn to position 9 release button and it should show errors if any and should show p09.
turn the dial anti clockwise start at position 1 this is test for motor and fan
p2 is the compressor test need to check that it’s pulling about 350 within the test
P3 is pump test and that’s all you can test, hope thus info helps this applies to most bosh Siemens dryers
kai
- You must be logged in to reply to this topic.