- This topic has 1 reply, 2 voices, and was last updated 2 years, 9 months ago by
.
-
Posts
-
Hi ive a Tricity Bendix wdr1040w washer/dryer
which seems to have something lodged under a paddle (probably a screw), ive pressed down the holes to release the clip that holds the paddle which now moves freely forwards and backwards but the paddle doesn’t want to lift off, just wondering what im missing as i really don’t want to force it without finding out first, thanks in advance
Barry
ps I’m assuming its a screw as im an electricianhi sorry but it wasn’t a screw but a red rawlplug, its been driving me mad for weeks and the day i posted this it came out, must be a lucky site
must be a lucky site it tries its best!
Just a general note on T Bendix / aka a Zanussi. Actually screws themselves usually get caught between the drum and the front of the tank beause the rear of the door seal droops making a larger gap than is usual allowing an easy access of foreign undesirable `orrible objects to fall through that gap and get trapped on a front drum seam rubbing on the inside (obviously) front half of the plastic tank with rather a noisy outcome or if a long term resident screw a very much wet outcome as the metal screw cuts throgh the plastic tank.with a less than hilarious catastrophic moist results!!
- You must be logged in to reply to this topic.