logik heat pump tumble dryer

Home › Forums › Trade Technical & Spare Parts Forums › logik heat pump tumble dryer

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 8, 2023 at 10:29 am #102157
    dunston
    Participant

    logik LHP8W18, S/N 0071561601016319 Tumble dryer. flashes an error code . out of the four lights from top to bottom the first and the fourth light flash 5 mins into the prog. In the customers handbook it says “compressor NTC connector disconnected”. I checked the connector, seems ok. has anyone changed an NTC before? or know the resistance the NTC should be?
    Thanks Mark.

    August 8, 2023 at 5:28 pm #487770
    Hollytree_Technical
    Participant

    The service manual is avaialable on ASWO for this one but I can send it to you if you don’t have access.
    I don’t see the error code that you mentioned in either the instruction book or the service manual.
    According to the manual bothe the door and compressor NTC sensors are a nominal 12K Ohm.

    Jem

    August 10, 2023 at 9:10 am #487771
    dunston
    Participant

    ok,. thanks jem. i would appreciate it if you could send us the service manual.

    mark

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.