- This topic has 5 replies, 2 voices, and was last updated 2 years, 7 months ago by
.
-
Posts
-
model sa2544c1x
ic 759991001520
ser 811024253
hi comes up with e53 fans run but no heat on any elements. can anyone confirm the fault please. read it could be temperature probe. thanksgot a hit on a different model and it says temp probe or main board
did see if it had a resitance value but no
try to see if its open circuit that would point to it bsing the probe as the board would need programming if that was the fault
also if you get it going a lot of these units do a self test procedure when you turn on the fan oven. when turned to fan oven the grill element is turned on and off in short bursts. only when the board detects a rise in temp does the main fan and element come on. it also means it wont start with the door off
fooled me completly the first one i got
Daveno
changing the probe alone should be ok
but if it ends up as a board fault then all new boards are blank
Dave
- You must be logged in to reply to this topic.