hotpoint heat pump dryer F03

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hotpoint heat pump dryer F03

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 11, 2023 at 5:26 pm #102228
    snig
    Participant

    Hotpoint AQC94F7EM
    Think F03 is front thermister. Tried a new one but no different. Tested wiring back to module but no breaks. Any ideas

    September 11, 2023 at 7:14 pm #488012
    electrofix
    Moderator

    F03 does seem to be front NTC

    on one sheet get a value of 614K at 20 degrees

    have not got exact manual but one i looked up uses EVO2 board

    Dave

    September 11, 2023 at 10:10 pm #488013
    Hollytree_Technical
    Participant

    You don’t say which industrial code you have but I have got the manual saved for a AQC94F7EM1UK 859990784970 (Arcadia) machine which confirms that F03 is the front NTC and gives a value of 49K – 51K @ 25C and 5.974K – 6.588K @ 80C

    I can send you what I have if you let me have an email address.

    Jem

    September 12, 2023 at 6:24 am #488014
    snig
    Participant

    getting a reading of about 45K when testing from the module so assuming thats ok, guess i must be looking at a module fault ??

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.