- This topic has 3 replies, 2 voices, and was last updated 2 years, 2 months ago by
.
-
Posts
-
AEG Integrated Dishwasher,
MN: FSB42607Z,
FD: 911 535 221 00,
SN: 94233159.Upon power on, the unit flashes all LED’s 4 times.
VIDEO: AEG Dishwasher error? (youtube.com)
Can select a program, shut door and no action. After approximately 2 minutes the door pops open.
Heating element is Open Circuit.
I’m not familiar with this later model, will it not allow a program to even start with a defective heater?
Any help on the codes/error procedure greatly appreciated.
Cheers.
Ty Dave. Will check/read tomorrow.
I did test door switch circuits and latch switch was open circuit with door open, and closed circuit door closed. So moved on… Will double check.
Machine popped open door twice after 2 mins, so pretty sure door shuts and program sequence is initiated.
Update: Resolved.
Fitted new heating element and pressure sensor.
However, it still blinked the LEDs and was silent upon active door shut, proceeded to pop open door after 2 mins.
So, the pdfs you sent mentioned blinking LEDs on demo mode. It was in demo mode. Customer must have accidentally activated it.
Done the into-demo-mode sequence (which took it out of demo mode) and all worked fine.
Massive thanks for your help on this one. Would never have been able to complete repair without that specific info.
Have a great week, cheers
- You must be logged in to reply to this topic.