- This topic has 6 replies, 3 voices, and was last updated 2 years, 2 months ago by
.
-
Posts
-
The fault was no water going into the conditioner compartment. The Dispenser water conveyor (top of the dispenser box) holes were badly blocked.
So i changed the conveyor 1325071056.
When I tested it – diagnostic postion C1 – nothing. C2- right valve opens. C3 – left valve opens. C4- both valves open. C5 – nothing.
And still no water going into the conditioner compartment. The left and right compartments fill OK
Should the conditioner compartment fill when both valves open?
Any help would be appreciated.see diags
if you put it in service mode you can energise the valves without going through a programme
Dave
In service mode position 4 energisers both valves letting water in but doesn’t fill compartment “c”. Both valves are opening. letting water in.
I had one do something similar and it turned out to be the valve. One of them wasn’t opening correctly to allow the correct amount of pressure through to take the conditioner.
Merv
- You must be logged in to reply to this topic.