Indesit dishwasher DSFO3T224ZUK

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Indesit dishwasher DSFO3T224ZUK

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • February 6, 2024 at 6:39 pm #102573
    dunston
    Participant

    This is the second Indesit Hotpoint dishwasher this week with a F15 error. It seems to drain OK
    I found a post from Nick Massey 13-02-19 about a virtual sensor – a reading between the wash and drain pump not constant.
    Anyone explain this virtual sensor?

    February 6, 2024 at 8:09 pm #489500
    electrofix
    Moderator

    have emailed you a doc i got a while ago on virtual sensors

    Dave

    February 6, 2024 at 8:42 pm #489501
    dunston
    Participant

    Thanks Dave. Night time reading.

    February 10, 2024 at 4:31 pm #489502
    matrixresonator
    Participant

    electrofix wrote:have emailed you a doc i got a while ago on virtual sensors

    Dave

    Afternoon Dave, any chance you could fire this over to me too please.

    February 10, 2024 at 8:19 pm #489503
    electrofix
    Moderator

    no probs

    Sorted

    Dave

    February 11, 2024 at 10:15 am #489504
    matrixresonator
    Participant

    Cheers Dave.

    February 17, 2024 at 11:39 am #489505
    neon_3SP_glow
    Participant

    They measure the physical resistance against the pump impellers and equate to water volume, don’t they?

    February 17, 2024 at 11:57 am #489506
    electrofix
    Moderator

    neon_3SP_glow wrote:They measure the physical resistance against the pump impellers and equate to water volume, don’t they?

    effectively
    higher the current to the motor the more work its doing

    Dave

    February 27, 2024 at 2:05 pm #489507
    twicknix
    Participant

    What did people find and how did they cure it? Dave made it sounds like that it is difficult to determine the problem.

    March 2, 2024 at 6:18 pm #489508
    Hollytree_Technical
    Participant

    Usually need to replace the wash pump to cure it, more often than not I have found the front bearing on this pump to be shot allowing the impellor to flop around and bind up.

    Jem

    March 20, 2024 at 4:27 pm #489509
    dunston
    Participant

    Thanks Jem. That was the fault. Wash motor with a faulty bearing.

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.