Hoover link washing machine mod DHL 1492D3/ 1-80

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover link washing machine mod DHL 1492D3/ 1-80

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • February 27, 2024 at 12:04 pm #102609
    fasetester
    Participant

    how to get into diagnostic mode machine only spins when empty if no blockage what else could cause this thanks

    February 27, 2024 at 6:20 pm #489642
    fasetester
    Participant

    Any information on putting machine in diagnostic program if there was a fault with motor would it wash as normal but not spin or could be PCB fault and which component could be the problem thanks

    February 27, 2024 at 8:40 pm #489643
    electrofix
    Moderator

    have sent you what i think is the test routine

    Dave

    February 27, 2024 at 8:55 pm #489644
    fasetester
    Participant

    Ok Dave where you sent it

    February 28, 2024 at 10:45 am #489645
    fasetester
    Participant

    Thanks Dave much appreciated

    March 6, 2024 at 10:01 am #489646
    fasetester
    Participant

    How likely is it that the plastic pulley could have damaged the splines on the drum shaft and a new pulley will not fit the teeth on the pulley have completely worn away and is the bolt self locking or better to use some tread lock thanks fasetester

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.