- This topic has 8 replies, 4 voices, and was last updated 1 year, 11 months ago by
.
-
Posts
-
I fitted a new set of carbons today. but I am unable to reset the board…tried the usual 6 0clock then spin etc didn’t work..any advice please…Joihn
try this
from off press and hold start turn knob ONE “not two” clicks left after about 10 seconds an odd display shows, turn off all now seems ok.
Dave
This normally works for me
- Turn off the machine (dial to 0)
- Open the door
- Turn control knob to position 1
- Close the door
- Turn off the machine
- Turn the control knob to the six-o-clock program, which is spin
- Press the option down button and keep it pressed (This is the button left of the display)
- Turn the control knob one position left to seven-o-clock (empty/pump out program)
- Release the option down button
- Turn off the machine.
Regards Neil
neilbow wrote:This normally works for me
- Turn off the machine (dial to 0)
- Open the door
- Turn control knob to position 1
- Close the door
- Turn off the machine
- Turn the control knob to the six-o-clock program, which is spin
- Press the option down button and keep it pressed (This is the button left of the display)
- Turn the control knob one position left to seven-o-clock (empty/pump out program)
- Release the option down button
- Turn off the machine.
Regards Neil
thats like 2 reset procedures in one
but if it works foir you thats ok
Dave
Yes I had a Siemens machine that would only reset this way the standard turn to position 6 and turn one click to the right etc etc would not work
Regards
Neil
neilbow wrote:Yes I had a Siemens machine that would only reset this way the standard turn to position 6 and turn one click to the right etc etc would not work
Regards
Neil
its like they have a full time employee paid to dream up odd reset proceedures lol
Dave
Up date : Dave your version worked on this model…thanks again..I agree why cant Bosch make a standard reset on all appliances..??
- You must be logged in to reply to this topic.