Hoover H3D4106TE/1-80 (3101087824640041) Washer/Dryer Error Code: E22

The above W/D is under one year old, but as it is located at a pig farm, is not covered under warranty.

Hence, I was called, and visited at the end of last week to inspect.

Essentially, the wash cycles are “taking ages to complete, not always doing so, and sometimes displays the above error code.”

I monitored the machine on a 30 minute cycle, and it behaved perfectly – draws water, agitates, heats, drains, rinses and spins perfectly.

Near the end of the above cycle, an employee let me know that they quite often start a wash programme when they are leaving at the end of the working day, and sometimes find the machine is still on the next day…

He also said that there is often a repetitive clicking noise during a cycle, which became evident as the door interlock began opening and closing right on cue!

I tested the door interlock, and no Ohms readings were recorded between any of the terminals. Hence I ordered a new door interlock, which arrived yesterday.
(out of interest, I tested the new interlock which also does not have continuation between any of the terminals.)

As the machine in question is a long way away from “base,” I would welcome any help, prior to returning!

I would be grateful if anyone could confirm what E22 relates to, as my research suggests drainage/blockage/pump problems, and E22 isn’t listed on here, or Hoover UK’s website.

If not, I’ll fit the door lock and go from there…

Regards,

jonty