- This topic has 4 replies, 3 voices, and was last updated 1 year, 2 months ago by
.
-
Posts
-
This dishwasher is filling washing and emptying continuously drain hose suspect as connected very low on the trap adjusted height still same when opening the door the water is still jetting in from the inlet press off switch still filling so thinking faulty aquastop also if you unplug it stops filling surely it should stop when door open so am I missing something
“surely it should stop when door open”
only if the timer tells it to stopif it goes off instantly with the plug then it cant be the valve
could be a leaky control triac on the board
Dave
Yes I new it couldn’t be the valve as it stops when plug is removed it does seem as though there must be a feed to the valve
Check the circuit board as per this post: https://www.ukwhitegoods.co.uk/forums/forum/trade-member-forums/trade-technical-spare-parts-forums/trade-technical-enquiries/48638-simple-pcb-repair-tips?p=891570#post891570
You can just remove the relevant capacitor as a quick test to confirm it if you are still unsure.
Jem
- You must be logged in to reply to this topic.