Electrolux oven fault codes – model EOC5751AOX

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Electrolux oven fault codes – model EOC5751AOX

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 25, 2025 at 5:20 pm #103192
    orbital_station
    Participant

    Hello everyone,

    Can anyone help me with error codes on my Electrolux EOC5751AOX oven.
    When I turn it on they go in this order:
    1. F02
    2. C63
    3. P022 0204
    Then comes the clock set part, when I set the clock new error appears.
    4. F136

    After that the display is frozen and displays F136 always, I cant do anything.

    I have read somewhere that F136 might be error with internal PT500 thermometer probe. I checked the resistance on it and it displays around 550 ohms.
    According to google that resistance is around 30 degrees, which is a bit high, room temperature is about 20, but I don’t know.
    Do you know any of the other codes?
    User manual is not much help.

    Does anyone have experience with electrolux oven repairs?
    Any help would be appreciated, new ovens go for 400-500 eur so would very much like to repair my old one.

    Thank you.

    January 25, 2025 at 11:24 pm #492145
    electrofix
    Moderator

    F136 comes up as

    Missing or damaged food probe module

    Dave

    January 26, 2025 at 5:17 pm #492146
    orbital_station
    Participant

    Thank you for the info.

    I never used it, why would it come as a fault now?
    Honestly i don’t even know where it is, or if I even have it, this oven was in the kitchen when I bought the apartment 5 years ago.

    Just to be clear you mean this module?
    https://buy.electroluxprofessional.com/electrolux-professional/elx0s0668
    External thermometer, not built in one?

    Do you have any info on other fault codes?

    January 26, 2025 at 7:32 pm #492147
    electrofix
    Moderator

    the others dont seem to be fault codes, was thinking it may be info as the computer boots up like sofware version etc

    also its talking about the probe module not the probe

    can only go by what the fault code description reads as have not seen many of these

    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.