circuit for indesit IDC8T3

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › circuit for indesit IDC8T3

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 6, 2025 at 6:40 pm #103399
    gary101
    Participant

    would be very grateful for a circuit diagram for this dryer. Just diagnosed a timer fault but would had been easier with the diagram (for future reference.)

    June 6, 2025 at 8:19 pm #493002
    electrofix
    Moderator

    well there are 2 possible timers so 2 diagrams

    whats the fault ?

    dave

    June 6, 2025 at 8:57 pm #493003
    gary101
    Participant

    fault is the timer/controller has no connection to the heater (orange) wire. open circuit. suspect burnt out contact within the controller.

    June 6, 2025 at 9:17 pm #493004
    electrofix
    Moderator

    thats the bitron timer

    this should be diagram

    Dave

    June 7, 2025 at 7:50 am #493005
    gary101
    Participant

    Many thanks. that certainly looks it. Machine is 7 years old and stopped heating. so looked at heater, then float switch (as warning lamp has never worked) the rubber propeller is good!. then ended up at the timer. So now pretty conversant with this dryer. Pleased as this is a basic dryer with little electronics so looks very repairable. And now with a schematic so will keep it working for as long as i can.

    June 14, 2025 at 6:01 pm #493006
    gary101
    Participant

    new timer fitted. all working.
    the timer i brought was a different one to that fitted. came with the attached leaflet.
    note that the diagram of the drier does have a different timer so making 3 alternative ones now. Invensys, Bitron, Phoenix.
    Hope this helps others.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.