zan dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zan dishwasher

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 20, 2025 at 1:07 pm #103478
    dopper
    Participant

    ZDLN1511 p/n 911539252 dishwasher, when turned on starts pumping out all the time. was expecting the base to be flooded. dry as bone. had a pressure switch so tried it on, still the same. anti flood switch seems ok. any thing else it could be?
    Cheers

    July 20, 2025 at 6:32 pm #493334
    electrofix
    Moderator

    well unless there is an earth fault then it could be a faulty triac on the board

    Dave

    July 21, 2025 at 4:00 pm #493335
    dopper
    Participant

    Hi dave i was thinking its the board, did another one today same problem, new p/switch fitted sorted it no problem. Thanks any way

    July 29, 2025 at 3:31 pm #493336
    neon_3SP_glow
    Participant

    Sure the base hasn’t warped? I’ve had them where the plastic warps and pushes the anti flood polystyrene against the micro switch despite no water.

    If not, either faulty pcb or wiring loom chewed.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.