zanussi zdt21001fa

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zanussi zdt21001fa

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 1, 2025 at 10:09 am #103640
    mikehha
    Participant

    two questions first when did connections remove mediator from there website or maybe I just cant find it . and second can any one send me the way of getting into the test program and the fault codes (flashes ) on this d/w. thanks

    November 1, 2025 at 11:57 am #494061
    electrofix
    Moderator

    have sent you some info
    there are 8 machines with same model so just picked one

    these machines are also flagged for the sensor mod so check the sump see below

    Dave

    November 1, 2025 at 12:23 pm #494062
    mikehha
    Participant

    thanks dave. had to rack my brains because these machines are old now but found there were 13 flashes which I seem to remember that was a tacho fault it use to keep the motor running at full speed so stopping the heater coming on any one know what reading i should be getting from the tacho.

    November 1, 2025 at 12:36 pm #494063
    electrofix
    Moderator

    when the tacho goes you will get open circuit so easy to tell

    ID code (D hex code for 13) yes its tacho no output. if motor is running then tacho is first on list

    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.