Beko WMB10W brushes

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Beko WMB10W brushes

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 5, 2005 at 3:40 pm #10530
    Gertrude
    Participant

    Hi all. 😀

    First post. let’s hope i don’t hear Last Post!

    Can any one advise where Beko brushes can be obtained?
    I work for an Insurance Co. (sorry chaps!) and am trying to get all brands covered for repairs through our network of repair agents, so knowledge of spares availability and from where is a must.

    Seme advised can now only purchase motor if brushes required and Beko have just confirmed this. 😮

    Any help will be greatly appreciated.

    All the best.

    July 5, 2005 at 4:09 pm #140486
    Dave_Conway
    Participant

    Re: Beko WMB10W brushes

    As with many manufacturers this will depend on the make of the motor as they are generally bought in from outside factories.

    Ceset, ZEM, Indesco, FHP, IBMEI etc to name a few.

    On the whole, most engineers wouldn’t need to order carbons brushes for any specific manufacturer as there is a huge crossover.

    Hope that hepls.

    Dave.

    July 7, 2005 at 1:28 pm #140487
    Lofthouse
    Participant

    Re: Beko WMB10W brushes

    Chances are that they are the Arcelik Carbon brushes, who make Beko products. Part No.9891. Instock.

    Best regards

    Webmaster
    http://www.homespare.com

    July 9, 2005 at 9:20 pm #140488
    Gertrude
    Participant

    Re: Beko WMB10W brushes

    Thanks very much for the advice. 😀

    I’ll certainly retain the info and pass it on to the network.

    Best regards,

    Gert.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.