Neff dishwasher S4466W0GB/07 FD7802 Fault code

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Neff dishwasher S4466W0GB/07 FD7802 Fault code

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 6, 2005 at 11:22 am #10551
    Electricmalc
    Participant

    Would anyone know what F in the display is indicating.
    Apparently no other lights flashing.

    Machine was set on rinse, but several hours later was still running.

    Thought I would ask B4 going to call tommorow.

    Any help appreciated please.

    July 6, 2005 at 1:03 pm #140573
    Martin
    Participant

    Re: Neff dishwasher S4466W0GB/07 FD7802 Fault code

    F in the display is “Flood” (Flut in German)…The base is flooded!

    July 6, 2005 at 2:57 pm #140574
    Electricmalc
    Participant

    Re: Neff dishwasher S4466W0GB/07 FD7802 Fault code

    Thanks very much Martin, will go see tomorrow. 🙂

    Malc

    July 7, 2005 at 10:22 pm #140575
    Electricmalc
    Participant

    Re: Neff dishwasher S4466W0GB/07 FD7802 Fault code

    No water in base, but overfill float was stuck at the top of the float chamber due to scale round the sides of the chamber and on the float.
    Rather than strip down the water manifolds, which looks to be a pig of a job, and may well cause a leak on reasembly, not having any new O rings, Gave the chamber and float a squirt of Viakal kettle de scaler. Then waited a while for de scaler to work. 😆

    Having got rid of the scale, set machine on a wash, but observed the water was not entering the sump quick enough, causing the overflow float to lift, but not quite enough to operate the overflow microswitch.

    Cleaned out hose going to sump, usual gunk had collected in the pipe, retested machine all ok.

    Malc

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.