3 Queries

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › 3 Queries

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 13, 2005 at 8:51 am #10649
    Toni
    Participant

    Hi all
    I have three seperate queries that I hope you can help with

    1st is a Blomberg 1301ABB washer that the timer has blown tracks on. Could the interloack have caused this ?. I have checked heater, motor etc, If so where is best to get part numbers & prices etc.

    2nd is an Ariston DW LSI62.
    This machine stops 1/2 way through and shows an error light on it.
    When you set it to a normal wash, it does the pre-rinse ok, then empties & fills & starts to wash, but it does not heat or open the dispenser, just washes in cold water for a while.(Heater is fine). Could it be the PCB ? if so does anyone have a part number ?

    3rd is a Hygena APM8720 washer.
    This one just needs an on/off switch, can anyone help with the Merloni/Servis part number ?

    Regards

    Toni

    July 13, 2005 at 9:27 am #141277
    iadom
    Moderator

    Re: 3 Queries

    Are you sure about that Ariston model number, no LS162 listed on Partfinder. Do you mean an LS 161 or an LS612 ? There is no PCB in the LS612.

    July 13, 2005 at 9:41 am #141278
    Dave_Conway
    Participant

    Re: 3 Queries

    Toni wrote:1st is a Blomberg 1301ABB washer that the timer has blown tracks on. Could the interloack have caused this ?. I have checked heater, motor etc, If so where is best to get part numbers & prices etc.

    Probably and given that the timer is circa £200 I wouldn’t look any further to be honest 😉

    Toni wrote:2nd is an Ariston DW LSI62.
    This machine stops 1/2 way through and shows an error light on it.
    When you set it to a normal wash, it does the pre-rinse ok, then empties & fills & starts to wash, but it does not heat or open the dispenser, just washes in cold water for a while.(Heater is fine). Could it be the PCB ? if so does anyone have a part number ?

    I can’t find the model listed Toni 🙁

    The only LSI are 45/61/68

    Toni wrote:3rd is a Hygena APM8720 washer.
    This one just needs an on/off switch, can anyone help with the Merloni/Servis part number ?

    522004402

    Dave.

    July 13, 2005 at 2:38 pm #141279
    Toni
    Participant

    Re: 3 Queries

    Hi Dave/ Iadom
    Re Ariston LSI62
    I have double checked the model number & it is definately correct, but the customer now tells me that it came directly from Italy.

    Does this mean I will have to contact Ariston ?

    Thanks for the help on the other parts though

    Regards
    Toni

    July 13, 2005 at 4:26 pm #141280
    Dave_Conway
    Participant

    Re: 3 Queries

    Toni wrote:Does this mean I will have to contact Ariston ?

    Sounds like it I’m afraid Toni 🙁

    Good luck 😉

    Dave.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.