AEG Santo Super 1672 Door Seal

Home › Forums › Public Support Forums › Help And Support › Fridge And Freezer Forum › AEG Santo Super 1672 Door Seal

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 18, 2005 at 12:14 pm #10757
    gimbals
    Participant

    Hi, I have bought a new door seal for my AEG fridge but cannot see how to change it. Can anyone help?
    Cheers
    Mike

    July 18, 2005 at 1:04 pm #141793
    Dave_Conway
    Participant

    Re: AEG Santo Super 1672 Door Seal

    Normally lifting the inner lip will reveal a load of screws to remove it.

    Dave.

    July 18, 2005 at 2:39 pm #141794
    Alex
    Participant

    Re: AEG Santo Super 1672 Door Seal

    99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of AEG seals are hermetically sealed to the door. This means the seal is nearly impossible to replace. Why AEG make them available in such cases is beyond me?

    To be certain if this is the case, the E-Number off the machine would confirm which model you own.

    There is a service kit available to overcome this, but was only available for a small selection of machines made in 1984.

    If your liner is not held on by about 20 screws then refer to Daves earlier post. If not, the best fix is a complete door. Not cheap.

    Alex

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.