Indesit D41 Pump Motor

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Indesit D41 Pump Motor

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 19, 2005 at 7:10 pm #10792
    admin
    Keymaster

    When the machine tries to fill all you get is a click and humming noise from the motor, then it goes quiet and it all starts again click followed by the hum.
    Also one of the lugs is missing from the drain pump cover so that is where it started leaking from and caused all these problems. Can any one tell me where i can get one

    July 19, 2005 at 8:53 pm #142752
    Dave_Conway
    Participant

    Re: Indesit D41 Pump Motor

    Before you buy the drain pump, I would investigate the circulation pump first as if it’s failed they aren’t that cheap.

    Drain pump – C00090537 at £22.72
    Circulation pump/motor – C00088121 at £69.47

    It may be worth checking the capacitor on the motor before condemning it as well. Power off please before heading in there :plug:

    Dave.

    July 20, 2005 at 8:17 am #142753
    admin
    Keymaster

    Re: Indesit D41 Pump Motor

    Ok thanks for your help

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.