Zanussi Fl1085 – not spinning

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Zanussi Fl1085 – not spinning

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • July 20, 2005 at 9:58 pm #10815
    admin
    Keymaster

    Hi Group
    I need some advice and you guys seem knowledgeable to help out!

    My washer doesn’t want to spin, i’ve checked the weight of the washing and it hasn’t made any difference also the distribution of the weight. I have checked the drain filter and checked for kinks in the drain pipe all are fine.

    Also the belt is still in place and hasn’t snapped or fallen off. (could it be slipping?)

    BTW its kind of difficult to get into am I right to assume the only access to the motor/belt etc. is via the top cover?

    thanks group

    Lee

    July 20, 2005 at 10:04 pm #142836
    Simon46
    Participant

    Re: Zanussi Fl1085 – not spinning

    Does the drum turn at all? Do you carry out many 90 degee washes?

    Regards
    Simon

    July 20, 2005 at 10:07 pm #142837
    admin
    Keymaster

    Re: Zanussi Fl1085 – not spinning

    Hi

    Drum doesn’t turn at all?

    Thanks

    Lee

    July 20, 2005 at 11:14 pm #142838
    clivejameson
    Participant

    Re: Zanussi Fl1085 – not spinning

    Lee

    The problem is most likely the motor brushes have worn out although it is possible the electronic module that controls its speed has let go.

    If you are unsure how to tackle the diagnosis then time to call an engineer 😉

    You could try Repairs@ to see if there’s an engineer near you?

    July 21, 2005 at 6:11 am #142839
    admin
    Keymaster

    Re: Zanussi Fl1085 – not spinning

    Thanks Clive,

    I do consider myself quite handy so if it isn’t too difficult i should be okay, any ideas how best to diagnose whether it is brushes or the electronic module?

    thanks again

    Lee

    July 21, 2005 at 6:20 am #142840
    Simon46
    Participant

    Re: Zanussi Fl1085 – not spinning

    Removal and visual inspection of motor brushes will confirm. Unplug first before checking :zap:

    July 21, 2005 at 8:54 am #142841
    admin
    Keymaster

    Re: Zanussi Fl1085 – not spinning

    Thanks Simon,
    There is no access panel on the back of the washer, so i’ll have to go in from the bottom, so I don’t do any 90 degree washes! 😉
    I kind of know what to expect when I see the brushes but how will i know if they are worn out? Presumably they’ll be half the size or less of the replacement brushes, but what size would this be?

    Appreciate the help.

    Lee

    July 21, 2005 at 11:51 am #142842
    Goatboy
    Participant

    Re: Zanussi Fl1085 – not spinning

    lee dobbing wrote:…but how will i know if they are worn out?

    They will be 1mm long instead of 2inch long.

    Or if one of the brushes is dull.

    The problem is, some of those Zanussi’s have phillips screws to hold in the brushes, and some have 5.5mm nuts. You may need professional help. It’s not easy at all! 😯

    Make sure the appliance is isolated from the mains, and make sure it won’t drop on your head!

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.