- This topic has 3 replies, 4 voices, and was last updated 20 years, 8 months ago by
.
-
Posts
-
I used to have part numbers for these (I used the hoover fill hose extension kit) and there were connectors to extend drain hoses too.
Does anyone have part numbers for these please?Re: Drain Hose and fill hose extension kits
These are Connect’s part numbers as they are the easiest to find 😉
Fill hose threaded connector – PLM675
Waste hose connector 22mm/22mm – PLM2054
” ” ” 17mm/22mm – PLM723
” ” ” 17mm/17mm – PLM604Dave.
Re: Drain Hose and fill hose extension kits
Qualtex have a universal drain hose extension kit. DWH53
To be honest I never join fill hoses, much prefer to fit a 2.5 mtr hose rather than join up two fill hoses.
Re: Drain Hose and fill hose extension kits
In the days i had a shop, that was the most frequently asked question. And one we could never answer as the customer never knew what the end of their existing drain hose was like or what it was going to fit on at the other (drain) end. i used to try a get a call out of it to fit a complete new one, often not an easy job these days.
Bosch used to do one to fit their drain hose that had a flat section, rather than the corrugations, every 10 cm or so that allowed a fubber sleeve to tighten down onto without leaking.
As for the ones with just a cut off corrugated hose there is nothing that will ever do the job properly.
- You must be logged in to reply to this topic.