- This topic has 4 replies, 4 voices, and was last updated 20 years, 8 months ago by
.
-
Posts
-
Hi,
I’ve now correctly set the configuration code for this, but it is still not functioning correctly. After a minute or two of operation (in any washing or drying programme) it pauses, and will not start again if you press the Pause button. Checking in the setup reveals E34 as the last fault. Does anyone know what this means?
Before it stopped running, it had a problem with the drain pump – the impeller fell off, and this has been refitted, and appears to work correctly. Maybe I’ve disturbed something else in removing and fixing this?!?
Any help would be much appreciated.Crispin Murray
Re: Zanussi E34 WJS1665W
I have found out that this to do with the water level / pressure sensors, and the fault has now cleared itself – I suspect it was an airlock from when I had the machine on it’s side.
Re: Zanussi E34 WJS1665W
Yes I agree I would be looking at pressure hoses blocked or split usually halfway down the length of the hose
But power off before you start to look
________________John
Re: Zanussi E34 WJS1665W
if this fault apears during drying might be blocked condensor, have had spurious faults caused by down to earth motor 🙄 cab
- You must be logged in to reply to this topic.