- This topic has 1 reply, 2 voices, and was last updated 20 years, 7 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Morning.. my girlfriend has a FL 1082 Washer and when it spins it is very load. Now it has stopped all together . Would any one have any idea as to what might be the problem.. Thx in advance..
Re: ZANUSSI FL1082
When these get noisy it is usually drum bearing failure. When the play in the drum gets bad enough the drum pully wobbles about enough to throw off the belt. If you hold the inner edge of the door seal with one hand and grasp the outer edge of the stainless steel drum with the other hand you can check for up and down play between the two. If there is play evident or the drum does not turn smoothly it will confirm bearing failure.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.