- This topic has 6 replies, 4 voices, and was last updated 20 years, 7 months ago by
.
-
Posts
-
can anyone help with this fault?
8542 540 15810
330250020309
ADG7540this machine will wash and heat up but sometimes will stop on the rinse and thats it nothing will work untill reset.
rinse light stays on and start light flashes.
if this helps?thank you
simonRe: whilpool b/i dishwasher. stops on rinse
Is there no sequence to the start light flashes Simon ?
I would suspect the NTC or the flow meter myself although the fact that it heats should mean the NTC is OK.
Dave.
Re: whilpool b/i dishwasher. stops on rinse
did not have time to wait and see. customer said it just flashed non stop.
i did ask them and they said no.
thanks
simonRe: whilpool b/i dishwasher. stops on rinse
If memory serves me correctly I’ve come across this, or a very similar, fault once before.
The machine would work ok on engineers test program and 50 degree wash but would fail on the 70 degree wash. I can’t remember if the start light flashed or whether the machine just kept washing though.
Changed the NTC, which checked out ok on diagnostics and on the meter, and this cured the fault.
The final rinse on these machines is a very hot rinse, could be the NTC is failing at this point.
Hope this is of some help.Brian
Re: whilpool b/i dishwasher. stops on rinse
poss thermister fault…find it behind pcb @ botton..follow 2 blue wire from pcb..t/mist plugs into sump area..half turn takes it out…
ps also check pressure switch also located @ sump near t/mist..half turn to take out..this gunges up causing silly stuff…
these to faults seem to be very common to w/pool d/w..
- You must be logged in to reply to this topic.