Hotpoint BC145 Dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint BC145 Dishwasher

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • September 1, 2005 at 3:23 pm #11724
    MARIO
    Participant

    Machine starts to fill then emptys before it has reached correct level and stops with middle (3) neon flashing. Can anyone tell me what this fault code is at all? Any help would be greatly appreciated

    September 1, 2005 at 3:47 pm #146390
    iadom
    Moderator

    Re: Hotpoint BC145 Dishwasher

    On most of these the 3rd neon flashing is a thermistor fault.

    September 4, 2005 at 6:32 pm #146391
    MARIO
    Participant

    Re: Hotpoint BC145 Dishwasher

    Thanks…but it’s not thermistor fault – had exhausted that one. Any other ideas? This customer is nice as well as patient and I’d like to try and resolve. Any other ideas?

    September 4, 2005 at 8:55 pm #146392
    Dave_Conway
    Participant

    Re: Hotpoint BC145 Dishwasher

    The control PCB is the same one used in the Hotpoint DC27, neon 3 flashing is an NTC fault so I would suspect a poor edge connection or even the board itself given that the NTC has been replaced already perhaps ?

    Dave.

    September 11, 2005 at 8:36 pm #146393
    MARIO
    Participant

    Re: Hotpoint BC145 Dishwasher

    Cheers for that Dave. Any idea of the part number I need for the NTC?

    September 11, 2005 at 10:37 pm #146394
    iadom
    Moderator

    Re: Hotpoint BC145 Dishwasher

    Partfinder ( it is riddled with errors ) does not list an NTC ( also known as a thermistor 😉 ) for this machine.

    The diagram for the DC27 shows what may be a thermistor but the corresponding part numbers are not in the parts list. 😥

    September 12, 2005 at 7:30 am #146395
    Martin
    Participant

    Re: Hotpoint BC145 Dishwasher

    iadom wrote:Partfinder ( it is riddled with errors ) . 😥

    …and it’s my guess the new Partfinder (due out at the end of this month) will be just as riddled 🙄

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.