Hotpoint WM12

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Hotpoint WM12

Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • September 2, 2005 at 5:01 pm #11755
    Bryan
    Participant

    Looking for replacement FHP motor and not sure if it`s 1604812 or 1604820.
    Original has yellow writing 904/1153/06 and it`s a 800rpm machine which I think is 1614088 but may be 1601800.
    I`m assuming 1614088 changes to 1604812 and 1601800 changes to 1604820.
    Oh my head….. TGI Friday. 😀

    Thanks

    Bryan

    September 2, 2005 at 6:29 pm #146544
    Phidom
    Participant

    Re: Hotpoint WM12

    Connect Mediator gives the 800 motor as 1604820.

    September 2, 2005 at 7:15 pm #146545
    iadom
    Moderator

    Re: Hotpoint WM12

    Partfinder has motor as 1604812 analogue 800/1200 motor for timer with separate module.

    1604820 is 800/1200 digital motor for use with hybrid controls.

    1604810 is analogue 1000 motor.

    September 2, 2005 at 7:17 pm #146546
    Bryan
    Participant

    Re: Hotpoint WM12

    Thanks Phil but both 1604820 and 1604812 are listed on mediator , that`s where my confusion started. :haier: :con:

    Bryan

    September 2, 2005 at 7:22 pm #146547
    iadom
    Moderator

    Re: Hotpoint WM12

    cough,! 😉

    September 2, 2005 at 7:36 pm #146548
    Bryan
    Participant

    Re: Hotpoint WM12

    Ok thanks for that info. iadom , but any way of knowing which motor without going back and having a look ❓ It`s definately a 800rpm so I`m still left with a choice.
    Does yellow writing 904/1153/06 point to one or other ❓

    Bryan

    September 2, 2005 at 7:54 pm #146549
    Penguin45
    Participant

    Re: Hotpoint WM12

    1604812 is the pre-digital machine’s motor.
    1604820 is the digital machine (ie combi timer/module) motor.

    The current motor is a 1200, being a yellow label. Blue was 800, red was 1000 and green was 1400.

    HTH,
    Chris.

    September 2, 2005 at 7:55 pm #146550
    iadom
    Moderator

    Re: Hotpoint WM12

    Only thing I can suggest is to ring customer and get the date code.
    Date code 16 is start of digital production.

    September 3, 2005 at 10:57 am #146551
    Bryan
    Participant

    Re: Hotpoint WM12

    From customer , serial number – 09151933…. about 8 years old.
    Does this make it motor 1604812 ❓

    Bryan

    September 3, 2005 at 1:06 pm #146552
    iadom
    Moderator

    Re: Hotpoint WM12

    😳 got my wires crossed. 😉

    September 3, 2005 at 1:08 pm #146553
    iadom
    Moderator

    Re: Hotpoint WM12

    That machine is pre digital produced in Sept 1994 you do need 1604812 for an 800 machine, it has obviously had a faster spin motor fitted at some time.

    Eight years old, 🙂

    September 4, 2005 at 10:22 am #146554
    Bryan
    Participant

    Re: Hotpoint WM12

    Thanks again 1604812 it is then 😀
    Well priced from Seme @£49:44+vat 😉

    Bryan

    September 4, 2005 at 7:47 pm #146555
    Phidom
    Participant

    Re: Hotpoint WM12

    Still dearer than a new armature, there are still some out there if you look. 😉

    September 4, 2005 at 10:02 pm #146556
    iadom
    Moderator

    Re: Hotpoint WM12

    Plenty of ARM 20’s as well.

  • Author
    Posts
Viewing 14 posts - 1 through 14 (of 14 total)
  • You must be logged in to reply to this topic.