Bosch WFF2001 – failing to spin

Home › Forums › Public Support Forums › Spare Parts Help › Bosch WFF2001 – failing to spin

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • September 7, 2005 at 11:04 am #11839
    admin
    Keymaster

    I have already replaced the carbon brushes in the motor (very worn, but only to be expected after 7 years of hard use), motor now makes a ratchet like noise when turning (i’m sure i have put the brushes in the right way around), suspect this will quieten down as the brushes bed in.

    Relay on main logic board clicks in and motor attempts to spin up (half heartedly), then the relay clicks back out.

    I won’t have a chance to check the field coils until the weekend, what are the chances of the control board being faulty?

    Any help greatly appreciated.

    September 7, 2005 at 11:21 am #146871
    Martin
    Participant

    Re: Bosch WFF2001 – failing to spin

    Good chance you have fitted the carbons in the wrong way, also the commutator could be damaged (segments) and yes the next in line to fail if the motor is dodgy is the speed control module 🙁

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.